This board consists of the FT232RL IC...
No best sellers at this time
FT232 Ultimate USB to UART ( TTL ) Board
This board consists of the FT232RL IC with pin header & screw terminals for the UART and other signals from FT232RL. Also it has a dedicated 3.3V regulator. Can run on 3.3V and 5V logic levels which can be selected via the Jumper. And all the pins of FT232RL brought out on the 14 pin header.
This board consists of the FT232RL IC with built-in Oscillator , EEPROM , 3.3V Regulator and all the necessary components such as Capacitors, Resistors, LEDs to get the USB to UART interface kicking. In addition to that as it’s the Ultimate version it also has the various kinds of connectors i.e. ( Pin Headers , Screw terminals , FRC connector ) for the UART pins . Also it has a dedicated 3.3V regulator for larger current draw (upto 800mA). Mates awesomely with the RS232 Level shifter Board for FT232 Ultimate Board
Features of FT232RL:
- Implements full v2.0 USB protocol
- Needs no external crystal
- Internal EEPROM for device ID and Product Description strings
- Royalty-Free Driver support for Windows, Linux, and Mac OSX
The Board consists of 2 LEDs ( Red for RX activity and Green for TX activity ) which comes in handy to troubleshoot whether the data is being Received and Transmitted. It also has a Jumper to Select the Logic voltage of 3.3V or 5V as the need may be. This module has all the pins of FT232RL brought out on the 14 pin header.
Just Plug-in the board into USB and you have a virtual COM port at your service. This Module comes fully Assembled and Tested with the necessary headers installed.